Range Rover Evoque LV 2.2 TD4224DT

Rear brake pad replacement

The service mode must be activated before replacing the rear brake pad/disc:

1. Release the parking brake
2. Gear lever in 'N' or 'P' position
3. Activating the ignition
4. Press and hold the electronic parking brake switch
5. Wait for 2 seconds
6. Press and hold the accelerator pedal
7. Wait for 2 seconds
8. Switch on and off within 2 seconds
9. An acoustic signal will be heard
10. Release the accelerator pedal
11. Release the parking brake

At the end of the work to deactivate the service mode perform the following procedure

• Gear lever in 'N' or 'P' position

• Activating the ignition

• Pull out and hold the parking brake switch

• Wait for 2 seconds

• Switch on and off within 2 seconds

• An acoustic signal will be heard

• Release the accelerator pedal

• Release the parking brake

good reading

kind regards

Antonio